CAS Module paramater aktivasyonu

[ALIENLOVE]

Sevgili SRKNZCN yoğun programında beni kırmadı ve bizim garajda 3 Modülün de parametrelerini aktif hale getirdik. Kendisi aracına daha önceden yapmıs oldugu için zaten yeterince iştah kabartıcı bir durum yarattı bana gelir gelmez. Kendisindeki ELM modülü bizim ebayden aldıgımız çin malı modulden daha hızlı ve kendi BMW applikasyonu oldugundan sıkıntısız bir biçimde bu aktivasyonlar yapılıyor. Yaptırmak isteyen olursa Serkanla kontaga gecebilirler yardımcı olacaktır.

Bizim yaptıgımız aktivasyonlar arasında
1- Kumanda Bagaj acma dugmesine ksıa basıslarda kısa hüzmeli farların anlık yakılabilmesi
2- Kumanda Bagaj acma düğmesine uzun basışda Panik alarmının çalması ( sadece MINI Alarm System olan araçlarda gecerli)
3- Kumanda Kilit düğmesine uzun basıldıgında camların ve sunroof un kapanması
4- Kumanda kapı acma dugmesine basıldıgında Sisler Parklar ve sinyallerin yumusak bir sekilde acılıp yanması. (istege baglı olarak farklı kombinasyonlar yapılabiliyor ben sisleri istedim)

Ayna katlama 2011 modellerde ayrı modül istediginden ne yazık ki calısmıyor ama 2013 modellerde calısıyor.

Emeklerinden dolayı Serkana tesekkur ederim.

Video asagıdadır.

[Talha]

Cok iyimis gule gule kullan.

[ALIENLOVE]

Cok iyimis gule gule kullan.

Kumandadan ayna katlama seninkinde olacaktır Talha 2013 degil mi senin araba?

[Talha]

Kumandadan ayna katlama seninkinde olacaktır Talha 2013 degil mi senin araba?

Tabi 2013 9. Ay cikisli.
Valla ben de talibim ama bu islere

[ALIENLOVE]

Tabi 2013 9. Ay cikisli.
Valla ben de talibim ama bu islere

O zaman Serkana bir mesaj at

[DOA29]

Serkanin ellerine saglik valla guzel olmus


iPhone 'den Tapatalk aracılığı ile gönderildi

[Kekuti]

Serkanın eline sağlık, güzel opsiyonlar olmuş gerçekten

[ALIENLOVE]

Bu arada eklemeyi unutmusum yolda giderken 4lüye basarsan hızlı bir sekilde yanıp sönüyor.

[SRKNZCN]

R56 araclarimizdaki tum parametre listesini paylasacagim sizinle. Ancak bu parametrelerin hepsi donanimsal olarak araca gore farklilik gosterebiliyor. Mesala benim jcw ve alen abinin cm de ayna katlanabilir gosterdigi halde frm modulu ile ayna modulu arasinda baglanti olmadigi icin aynalar katlanmiyor.


iPhone 'den Tapatalk aracılığı ile gönderildi

[SRKNZCN]

Merhaba arkadaşlar.

BMW ve MINI grubu araçlarımızda aracımızın elektronik aksamlarını kontrol eden modüller bir çok yeteneğe sahip olmasına rağmen, üretici firma tarafından bazı özellikler kapalı/açık olabilir ve bu bizim zevkimize yada ihtiyacımıza uygun olmayabiliyor. Bu modüller birer programlanabilir devre olduğu için anlık olarak yada sonradan müdahale edilebiliyor. Bazı değişikliklere OBC üzerinden ulaşabilirken bazılarına ulaşamıyoruz. Örneğin MINI sahipleri olarak kumandamızın kilit tuşuna baslı tuttuğumuz halde camlarımız kapanmıyor ancak yine kumandadan kilit açma tuşuna bastığımızda camlarımız ve tavanımız açılabiliyor. Oysaki bizim araçlarımızda bulunan kontrol modülleri üreticinin bizi mahkum kıldığı bazı kurallardan fazlasını destekliyor. Verdiğim örnekten yola çıkmak gerekise, MINI markası "...aracınızın camının kumandadan kapanmamasının sebebi evcil hayvanınızın yada çocuğunuzun elinin siz farkında olmadan sıkışmasını engellemek..." şeklinde bir açıklamayla kumandadan cam kapatma özelliğini kaldırmış. Oysaki aynı yazılım kodlamasını kullanan E8X 1 serisi bir BMW araç bu özelliğe sahip. (BMW araçlardada benzer açıklamarla bir çok parametre kapalı geliyor...)

Kumanda kilit tuşuna basılı tutulduğu zaman camların kapanması ve hatta aynaların kapanabilmesi gibi çok basit özellikler bizimde hakkımız diyerek bir DIY hazırlamak istedim...

Aracımızdaki modüllerin müsade ettiği sınırlar içerisinde, istediğimiz şeyleri yapabilmesi için bu modüllerin kendi anlayacakları dilden yeniden programlanması gerekmekte. Az önce bahsettiğim gibi bazı parametreler kolayca OBC üzerinden kodlanabiliyor. Örn. Sinyal koluna hafifçe dokununca 1 kez yerine 3 kez sinyali yakması gibi. Ama bazı parametreler ise belirli gerekçelerden dolayı pasif durumda. Bu parametreleri değiştirmek istediğimizde gerekli modülleri yeniden kodlamamız gerekiyor.

Kısaca : motorumuzun çalışma / ateşleme / benzin / hava akışını kontrol eden modül üzerindeki yazılıma müdahale ederek nasıl ki aracımızı güçlendiriyor ve motoru bize verilenden farklı çalışıtrıyorsak, diğer elektronik aksamıda istediğimiz gibi kullanabiliriz... Bu müdahale için araçlarımız bize bir iletişim kapısı sunuyor. OBD v2 / OBDII portu üzerinden araçlarımızdaki hemen hemen tüm elektronik sisteme el atabiliriz. Modüllere erişebilmek içinde gerekli yazılım - donanım ve teknik tecrübe gerekiyor. Aksi taktirde modüllerimiz erişilemez olabilir ve hatta aracımız çalışmayabilir. (burada anlatılanları kendi aracınıza uygularken lütfen çok dikkatli olunuz.)

Kodlama işlemi için denemelerim arasında en uygun ve sağlıklı bulduğum BMWhat isimli yazılım ve donanım. Cihaz ile yazılım arasındaki veri iletişimi oldukça hızlı. Yazılım kendi cihazı ile birlikte yedekleme ve acil durumda reset imkanı veriyor, voltaj düşmesi vb sebeplerden bir sorun yaşasak bile geri dönebiliyoruz.

Kendi aracımda apple cihazım ve aracım arasına bilgisayarımı sokarak veri transferini izledim ve oldukça başarılı sonuçlar elde ettim...

[SRKNZCN]

Kullanılan uygulama : BMWhat
Donanım : BMWhat Wi-Fi adapter

R56 Araçlarımızda müdahale edebildiğimiz parametreler ve modüller :

CAS: Comfort start
active
not active
Parameter: Ignition key just has to be tapped once to start the engine after ignition is turned on.

CAS: Comfort eject
active
not active
Parameter: Key is ejected, when Start/Stop button is pressed and ignition is turned off.

CAS: Comfort open using remote
active
not active
Parameter: Press and hold the unlock button on the remote to open all windows and the sunroof. Convertibles open the roof instead.

CAS: Comfort close using remote
active
not active
Parameter: Press and hold the lock button on the remote to close all windows and the sunroof. Convertibles close the roof instead.

CAS: Comfort folding/unfolding for sideview mirrors
active
not active
Parameter: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate "Comfort folding/unfolding for sideview mirrors" in the "FRM" module.

CAS: Easy entry
active
not active
Parameter: Press the unlock button once to unlock all doors. Press it again to lower the driver side window.

CAS: Easy entry Key 1
active
not active
Parameter: Separate setting for "Easy entry" for key 1. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.

CAS: Easy entry Key 2
active
not active
Parameter: Separate setting for "Easy entry" for key 2. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.

CAS: Easy entry Key 3
active
not active
Parameter: Separate setting for "Easy entry" for key 3. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.

CAS: Easy entry Key 4
active
not active
Parameter: Separate setting for "Easy entry" for key 4. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.

CAS: Selective central locking
active
not active
Parameter: Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.

CAS: Selective central locking Key 1
active
not active
Parameter: Separate setting for "Selective central locking" for key 1. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.

CAS: Selective central locking Key 2
active
not active
Parameter: Separate setting for "Selective central locking" for key 2. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.

CAS: Selective central locking Key 3
active
not active
Parameter: Separate setting for "Selective central locking" for key 3. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.

CAS: Selective central locking Key 4
active
not active
Parameter: Separate setting for "Selective central locking" for key 4. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.

CAS: Selective central locking - unlock fuel lid
active
not active
Parameter: The fuel lid is also unlocked upon the first unlock, when "Selective central locking" is active.

CAS: Lock tailgate when car locked
active
not active
Parameter: Tailgate cannot be unlocked, when car is locked.

CAS: Automatically lock vehicle Key 1
active
not active
Parameter: Separate setting for "Automatically lock vehicle" for key 1. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.

CAS: Automatically lock vehicle Key 2
active
not active
Parameter: Separate setting for "Automatically lock vehicle" for key 2. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.

CAS: Automatically lock vehicle Key 3
active
not active
Parameter: Separate setting for "Automatically lock vehicle" for key 3. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.

CAS: Automatically lock vehicle Key 4
active
not active
Parameter: Separate setting for "Automatically lock vehicle" for key 4. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.

CAS: Lock vehicle upon ignition
active
not active
Parameter: Vehicle is locked, when ignition is turned on.

CAS: Unlock car when turned off
active
not active
Parameter: Doors are automatically unlocked, when ignition key is ejected. Only works if "Lock vehicle at x kph Key 1-4" is activated.

CAS: Threshold speed for vehicle locking
2 kph
6 kph
12 kph
18 kph
24 kph
30 kph
Parameter: Sets the speed at which the vehicle automatically locks all doors. For models other than E46 values 1 to 6 mean the following: 4 kph, 8kph, 12 kph, 20 kph, 24 kph, 28 kph To activate this option you need to activate "Lock vehicle at x kph" for the according keys.

CAS: Lock vehicle at x kph Key 1
active
not active
Parameter: Automatically lock the vehicle at the set threshold speed when key 1 is used.

CAS: Lock vehicle at x kph Key 2
active
not active
Parameter: Automatically lock the vehicle at the set threshold speed when key 2 is used.

CAS: Lock vehicle at x kph Key 3
active
not active
Parameter: Automatically lock the vehicle at the set threshold speed when key 3 is used.

CAS: Lock vehicle at x kph Key 4
active
not active
Parameter: Automatically lock the vehicle at the set threshold speed when key 4 is used.

CAS: Interior lights with remote
active
not active
Parameter: Pressing the lock button on the remote, when the car is already locked, turns on the interior lights.

CAS: Panic mode remote
active
not active
Parameter: Press and hold the "unlock trunk" button to trigger the alarm.

CAS: Unlock rear window
active
not active
Parameter: Key unlocks rear window instead of trunk lid in touring models.

CAS: Unlock rear window key 1
active
not active
Parameter: Key 1 unlocks rear window instead of trunk lid in touring models.

CAS: Unlock rear window key 2
active
not active
Parameter: Key 2 unlocks rear window instead of trunk lid in touring models.

CAS: Unlock rear window key 3
active
not active
Parameter: Key 3 unlocks rear window instead of trunk lid in touring models.

CAS: Unlock rear window key 4
active
not active
Parameter: Key 4 unlocks rear window instead of trunk lid in touring models.

CAS: Unlock rear window with outside trunk lid button
active
not active
Parameter: Outside trunk lid button opens rear window instead of trunk lid in touring models.

CAS: Unlock rear window with outside trunk lid button Key 1
active
not active
Parameter: Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 1.

CAS: Unlock rear window with outside trunk lid button Key 2
active
not active
Parameter: Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 2.

CAS: Unlock rear window with outside trunk lid button Key 3
active
not active
Parameter: Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 3.

CAS: Unlock rear window with outside trunk lid button Key 4
active
not active
Parameter: Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 4.

CAS: Unlock rear window with footwell switch
active
not active
Parameter: Footwell switch opens rear window instead of trunk lid in touring models.

CAS: Unlock rear window with footwell switch Key 1
active
not active
Parameter: Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 1.

CAS: Unlock rear window with footwell switch Key 2
active
not active
Parameter: Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 2.

CAS: Unlock rear window with footwell switch Key 3
active
not active
Parameter: Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 3.

CAS: Unlock rear window with footwell switch Key 4
active
not active
Parameter: Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 4.

CAS: Prohibit engine start without brake
active
not active
Parameter: Engine can"t be started when brake is not pressed.

CAS: Power windows switch-off condition
active
not active
Parameter: When this option is activated (us in E46) the windows are switched off immediately after the ignition is turned off. When deactivated (ece in E46) the windows are active for another minute.

CAS: Arm/Disarm Anti-Theft Alarm System
Only with remote
With locks and remote
Parameter: Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote.

FRM: Flasher with bi-xenon
not active
active
Parameter: Bi-xenon lamps are used for flasher.

FRM: Front fog lights and high beams not simultaneously
not active
active
Parameter: Front fog lights are automatically turned off when activating high beams.

FRM: Front fog lights and flasher not simultaneously
not active
active
Parameter: Front fog lights are automatically turned off when activating flasher.

FRM: Turn off interior lighting after 2 minutes
active
not active
Parameter: Interior lighting is automatically turned off after two minutes.

FRM: Soft turn on/off for interior lighting
active
not active
Parameter: Interior lighting is softly turned on and off.

[SRKNZCN]

FRM: Optical confirmation for unlocking vehicle
not active
active
Parameter: Optical confirmation for unlocking vehicle is active/not active.

FRM: Optical confirmation for unlocking vehicle Key 1
not active
active
Parameter: Optical confirmation for unlocking vehicle is active/not active. Separate setting for "Optical confirmation for unlocking" for key 1.

FRM: Optical confirmation for unlocking vehicle Key 2
not active
active
Parameter: Optical confirmation for unlocking vehicle is active/not active. Separate setting for "Optical confirmation for unlocking" for key 2.

FRM: Optical confirmation for unlocking vehicle Key 3
not active
active
Parameter: Optical confirmation for unlocking vehicle is active/not active. Separate setting for "Optical confirmation for unlocking" for key 3.

FRM: Optical confirmation for locking vehicle
not active
active
Parameter: Optical confirmation for locking vehicle is active/not active.

FRM: Optical confirmation for locking vehicle Key 1
not active
active
Parameter: Optical confirmation for locking vehicle is active/not active. Separate setting for "Optical confirmation for locking" for key 1.

FRM: Optical confirmation for locking vehicle Key 2
not active
active
Parameter: Optical confirmation for locking vehicle is active/not active. Separate setting for "Optical confirmation for locking" for key 2.

FRM: Optical confirmation for locking vehicle Key 3
not active
active
Parameter: Optical confirmation for locking vehicle is active/not active. Separate setting for "Optical confirmation for locking" for key 3.

FRM: One-touch turn signal function
value 01
value 02
Parameter: Number of turn signals when tapping the turn signal.

FRM: One-touch turn signal function Key 1
value 01
value 02
Parameter: Number of turn signals when tapping the turn signal. Separate setting for "One-touch turn signal function" for key 1

FRM: One-touch turn signal function Key 2
value 01
value 02
Parameter: Number of turn signals when tapping the turn signal. Separate setting for "One-touch turn signal function" for key 2.

FRM: One-touch turn signal function Key 3
value 01
value 02
Parameter: Number of turn signals when tapping the turn signal. Separate setting for "One-touch turn signal function" for key 3.

FRM: Continue window function when door is opened
active
not active
Parameter: When the door is opened while its window is opening/closing, the window will continue opening/closing the window.

FRM: Mirror tilt 1/2
active
not active
Parameter: Requirement for mirror tilt functions.

FRM: Mirror tilt 2/2
active
not active
Parameter: Requirement for mirror tilt functions.

FRM: Comfort folding/unfolding for sideview mirrors
active
not active
Parameter: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the "CAS" module.

FRM: Tilt mirror in reverse
active
not active
Parameter: This function requires an installed LIN-Bus. Passenger mirror is tilted when switching into reverse gear. To activate this option activate "Mirror tilt", aswell.

FRM: Electrochromatic mirror dimming
active
not active
Parameter: This function requires an installed LIN-Bus. Side mirrors automatically dim electrochromatic.

FRM: Daytime running lights (Europe)
not active
active
Parameter: Daytime running lights (Europe) active/not active.

FRM: Daytime running lights (Europe) Key 1
not active
active
Parameter: Daytime running lights (Europe) active/not active. Separate setting for "Daytime running lights (Europe)" for key 1

FRM: Daytime running lights (Europe) Key 2
not active
active
Parameter: Daytime running lights (Europe) active/not active. Separate setting for "Daytime running lights (Europe)" for key 2.

FRM: Daytime running lights (Europe) Key 3
not active
active
Parameter: Daytime running lights (Europe) active/not active. Separate setting for "Daytime running lights (Europe)" for key 3.

FRM: Sidemarker (US)
not active
active
Parameter: Sidemarkers are permanently active. May need additional "Sidemarker (US)" options set to "active" if available.

FRM: Sidemarker (US) brightness
value 03
Parameter: Brightness for "Sidemarker (US)".

FRM: Daytime running lights (US)
not active
active
Parameter: Use dimmed turn signals as daytime running lights. To activate this option, set the brightness to bright or dark.

FRM: Daytime running lights customization
Off
Turn signals (US)
High beams
Low beams
Corona-rings/Angel-eyes (EU)
Parameter: Customization of the daytime running lights. For Corona-rings/Angel-eyes also activate "Daytime running lights (Europe)".

FRM: Daytime running lights - high beams
not active
active
Parameter: Use high beams as daytime running lights. To activate this option, set "Daytime running lights" to "High beams".

FRM: Daytime running lights - high beams brightness
value 01
Parameter: Brightness for "Daytime running lights high beams".

[SRKNZCN]

FRM: Activate follow me home lights
not active
active
Parameter: Follow me home lights are active/not active.

FRM: Follow me home lights with remote
not active
active
Parameter: Quickly press the "Open trunk" button twice to activate the follow me home lights. Under some circumstances the option "Panic mode remote" in the CAS has to be activated, too.

FRM: Follow me home lights duration
value 01
value 02
value 03
value 04
value 05
Parameter: Duration of follow me home lights in seconds. To activate follow me home lights, activate the flasher, while the enginge is off.

FRM: Follow me home lights duration Key 1
value 01
value 02
value 03
value 04
value 05
Parameter: Separate setting for duration in seconds of follow me home lights for key 1.

FRM: Follow me home lights duration Key 2
value 01
value 02
value 03
value 04
value 05
Parameter: Separate setting for duration in seconds of follow me home lights for key 2.

FRM: Follow me home lights duration Key 3
value 01
value 02
value 03
value 04
value 05
Parameter: Separate setting for duration in seconds of follow me home lights for key 3.

FRM: Cancel follow me home lights
active
not active
Parameter: Follow me home lights are cancelled, when activating the flasher again.

FRM: Extend follow me home lights
active
not active
Parameter: Follow me home lights are displayed longer, when activating the flasher again.

FRM: Welcome lights
active
not active
Parameter: Welcome lights are turned on, when vehicle is unlocked.

FRM: Welcome lights Key 1
not active
active
Parameter: Separate setting for "Welcome lights" for key 1.

FRM: Welcome lights Key 2
not active
active
Parameter: Separate setting for "Welcome lights" for key 2.

FRM: Welcome lights Key 3
not active
active
Parameter: Separate setting for "Welcome lights" for key 3.

FRM: Welcome lights Key 4
not active
active
Parameter: Separate setting for "Welcome lights" for key 4.

FRM: Welcome lights duration
off
5s
10s
20s
40s
90s
Parameter: Duration of the welcome lights in seconds.

FRM: Welcome lights - low beams
not active
turn on softly
turn on hard
Parameter: Low beams are turned on with welcome lights.

FRM: Welcome lights - brake force display
not active
turn on softly
turn on hard
Parameter: Brake force display is turned on with welcome lights.

FRM: Welcome lights - braking lights
not active
turn on softly
turn on hard
Parameter: Braking lights are turned on with welcome lights.

FRM: Welcome lights - turn signals front
not active
turn on softly
turn on hard
Parameter: Turn signals front are turned on with welcome lights. To activate this option you may need to additionally code "Sidemarker (US) brightness" to "very low" or higher.

FRM: Welcome lights - turn signals rear
not active
turn on softly
turn on hard
Parameter: Turn signals rear are turned on with welcome lights. To activate this option you may need to additionally code "Sidemarker (US) brightness" to "very low" or higher.

FRM: Welcome lights - high beams
not active
turn on softly
turn on hard
Parameter: High beams are turned on with welcome lights.

FRM: Welcome lights - number plate lighting
not active
turn on softly
turn on hard
Parameter: Number plate lights are turned on with welcome lights.

FRM: Welcome lights - front fog lights
not active
turn on softly
turn on hard
Parameter: Front fog lights are turned on with welcome lights.

FRM: Welcome lights - rear fog lights
not active
turn on softly
turn on hard
Parameter: Rear fog lights are turned on with welcome lights.

FRM: Welcome lights - corner LEDs
not active
turn on softly
turn on hard
Parameter: Corner LEDs are turned on with welcome lights.

FRM: Welcome lights - parking lights front
not active
turn on softly
turn on hard
Parameter: Parking lights front are turned on with welcome lights.

FRM: Welcome lights - parking lights rear
not active
turn on softly
turn on hard
Parameter: Parking lights rear are turned on with welcome lights.

FRM: Seatbelt Hand-Over driver
not active
active
Parameter: Automatic seatbelt hand-over for driver is active/inactive.

FRM: Seatbelt Hand-Over passenger
not active
active
Parameter: Automatic seatbelt hand-over for passenger is active/inactive.

FRM: Crash lights
standard
double
Parameter: Hazard lights blink once or twice upon an accident.

FRM: Hazard lights
standard
double
Parameter: Hazard lights blink once or twice.

KOMBI: Digital speedometer
not active
active
Parameter: Digital speedometer is displayed in dashboard. This option does not work with every model yet. If there is no digital speedometer available after coding this option, please set this option back to not active and send that log.

KOMBI: Digital speedometer permanent
not active
active
Parameter: Digital speedometer is displayed permanently in dashboard.

KOMBI: Digital speedometer correction
not active
active
Parameter: Active: corrected speed is displayed in dashboard Inactive: true speed is displayed in dashboard

KOMBI: Speedometer correction
not active
active
Parameter: Active: corrected speed is displayed in dashboard Inactive: true speed is displayed in dashboard

KOMBI: Speed limit warning
not active
active
Parameter: Speed limit warning at 120 kph is active/not active.

KOMBI: GPS time correction
not active
active
Parameter: Time of day is corrected by using GPS.

KOMBI: Ignition key warning
not active
active
Parameter: Ignition key warning active/not active.

KOMBI: Gear shift indicator 1/3
not active
active
Parameter: Gear shift indicator in the on board computer. To activate this function, also activate other codings for "Gear shift indicator".

KOMBI: Gear shift indicator 2/3
not active
active
Parameter: Only change with "Gear shift indicator 1/3".

KOMBI: Gear shift indicator 3/3
value 01
value 02
Parameter: Only change with "Gear shift indicator 1/3".

KOMBI: Gear shift indicator key 1
value 01
value 02
Parameter: Gear shift indicator for key 1.

KOMBI: Gear shift indicator key 2
value 01
value 02
Parameter: Gear shift indicator for key 2.

KOMBI: Gear shift indicator key 3
value 01
value 02
Parameter: Gear shift indicator for key 3.

KOMBI: Gear shift indicator key 4
value 01
value 02
Parameter: Gear shift indicator for key 4.

KOMBI: Cruise Control speed display
0s
4s
6s
Parameter: The set speed of the cruise control is shown for a couple of seconds in the on board computer.

[ALIENLOVE]

Eline saglık Serkan

[GOKHAN]

Serkan çok güzel bilgiler paylaşımın için teşekkürler.